You can newly decide between 2 Lead Acid batteries:
36V 12Ah Lead Acid (SLA) with driving distance 24 km
36V 15Ah Lead Acid (SLA) with driving distance 30 km
Introducing new XE1000 Plus SLHC V2 Series:
Double Front Suspension – Contributes to increasing the riding safety and tackle various road hazards. It is possible to adjust the stiffness of the front and rear springs to accomodate for rider´s preference and weight.
2 power modes – Everyone can find the ideal power mode best suited for them and the maximum speed of the scooter. Thanks to the ability of switching to Eco mode, everybody can use this scooter (children, teenagers, adults...).
Brand Name Tires – Our company uses the best available components! That´s why our scooters only use Kenda and CST brand tires. We have retreated from using low-quality tires used today by cheap copies due to surprisingly poor quality and durability.
Completely new chain tensioning system – Only with our company can you find a new chain tensioning system. The old system required tedious and frequent adjustment, but the new system simplifies the process. The result is less time spent tensioning the chain, which is routine maintenance on the scooter.
More about Nitro Scooters XE1000 PLUS SLHC V2
We offer the latest generation of the 36V model line. The 36V 1000W motor is designed for individuals up to 100kg, however, if the scooter will be used in hilly terrain for people over approx. 80Kg we recommend the 48V or 60V models.
All our electric scooters are adorned by integrated front and rear LED lights. The front light has 7 diodes and the rear light has 6 diodes. When braking, similarly to a motorcycle, the rear brake light diodes double their luminous intensity. This integrated illumination increases driving safety.
Lighting is powered by the scooter batteries, but thanks to LED technology, consumption is almost zero. The lighting can be switched off with the exception of the rear brake light, which must remain on for safety reasons.
We offer this model with brand name off-road 10.5 inch tires which have been well-proven on gasoline models.
These tires can absorb all the shaking caused by road inequalities and thanks to the all terrain tread, the scooter can also be safely used off-road.
Power throttle with 2 power modes
Battery capacity is clearly showed on the LED display located next to the accelerator (gas) which is placed on the right hand grip.
The 3 color LEDs show the current battery status which allows you to predict the km range. To start, just turn the handle slightly towards you and the scooter will smoothly start to move.
One of the new features is the choice between 2 performance modes. The ECO/TURBO button is located on the accelerator. By pressing the red button you can activate the Economic Moce (ECO). Engine power is automatically reduced to approximately 750W. This mode allows you to save battery power and drive longer distances on a single charge. When the button is off, the scooter reaches the full 1000W power.
This model is equipped with both front and rear suspension. An important innovation is the addition of another spring to the front axle. The result is better suspension dampening and increased safety. The spings work in harmony with the massive siderails in combination with the rocker arm spring (ball bearings system) we developed. The old system (fixed storage) which is still sometimes used for non-branded scooters was very problematic.
This new system (based on the storage in bearing principle) does not require any tightening of the locking screws and the result is a very smooth spring stroke! The stiffness of the front and rear springs can be adjusted according to the user's needs (from soft to tough).
The rear hinge suspension is secured by two massive springs to provide maximum riding comfort despite road inequalities.
Brakes & Handlebars
Wide racing handlebars are a basic prerequisite for easy scooter control at higher speeds. To improve safety, the BMX handlebars have a soft cover. The handlebar itself can be positioned lower by a few centimeters if necessary.
The right side of the handlebar is used to operate the gas lever (accelerator) and the front brake lever (the same as motorcycle steering). The left side of the handbar is used to operate the rear brake lever. If the rider prefers a brake system similar to what is used on bicycles, we are happy to make this adjustment free of charge.
We continually improve the brake system every year. Current models are available exclusively with high quality bike brakes, stainless steel discs and pull-resistant sport levers. Bike brakes have a simple adjustment system and are much more stable than older types of brakes. The Scooter can be stopped within a few metres thanks to this improvement. In order to increase the braking effect, the brake pads are made of hardened material.
Brake levers have factory-fitted threads for the possibility of installing the original Nitro scooters rearview mirrors, which greatly contribute to driving safety.
Others - removable saddle, scooter composition ...
We recommend to use the scooters with the installed saddle. Riding with the saddle increases driving comfort and also sense of safety when maneuvering. It is height-adjustable and can also be used for taller people.
To increase driving safety, each of our scooters has a bell.
For storing or transporting, the scooter can be simply and quickly folded by pressing a lever. This takes only a few seconds. The Scooter can be loaded into the trunk of the car and can be easily transported.
For easier scooter handling, the battery can be easily removed from the scooter. The batteries are stored in a textile bag and the kit is attached to a scooter by one cable with a connector.
As a spare part, you can then purchase an external charging cable that allows you to charge the battery pack outside of the scooter.